The 10 and 14 pole potential test paddles are feature packed and have been designed to make a test technician's job easier.
Handle - use one hand to connect to test switch
Labeled - locate connector to corresponding switch

Use for STATES FMS Test Switch
and ABB FT-1 10 Pole Test Switch

Part No. V1TP10 - 10 Pole Test Paddle
Part No. FTP14 - 14 Pole Test Paddle
Please Note:
While the V1TP10, 10 pole test paddle, can be used on most competitor 10 pole test switches, the STATES FTP14, 14 pole paddle, is only compatible with the STATES FMS 14 Pole Test Switches.

Test Paddle Knobs
Part No. 677099
The test paddle knobs have a brass insert that includes a test jack receptacle. It accommodates both banana and safety plugs on top and has a 10-32 thread on the bottom to accommodate lug adapters.

ItemPart No.DescriptionQTY
AV1TP10FMS 10 Pole Potential Test Paddle1
B150LSI PROBE - (15000) Leads W/Red and Black Lugs1
C620088*15923 - Test lead, red, 6 mm dia., 150 cm long, use with current outputs
(up to 30 Amps) CAT II Insulation

*15924 - Test lead, black, 6 mm dia., 150 cm long, use with current outputs (up to 30 Amps) CAT II Insulation

*We do not sell the 15923 and 15924 individually, only combined/twisted into Part No. 620088.
1
D684025Test lead, red, 200 cm long, use with voltage/current (up to 15 Amps) and timer, CAT II insulation1
D684026Test lead, black, 200 cm long, use with voltage/current (up to 15 Amps) outputs and timer, CAT II insulation1
E684027Lug adapter, red, 6.2 mm, use with voltage/current (up to 30 Amps) outputs and timer, CAT II Insulation1
E684028Lug adapter, black, 6.2 mm, use with voltage/current (up to 30 Amps) outputs and timer, CAT II Insulation1
F684029Lug adapter, red, 4.1 mm, use with voltage/current (up to 20 Amps) outputs and timer, CAT II Insulation1
F684030Lug adapter, black, 4.1 mm, use with voltage/current (up to 20 Amps) outputs and timer, CAT II Insulation1

ItemPart No.DescriptionQTY
AV1TP10FMS 10 Pole Potential Test Paddle1
B150LSI PROBE - (15000) Leads W/Red and Black Lugs1
C620088*15923 - Test lead, red, 6 mm dia., 150 cm long, use with current outputs
(up to 30 Amps) CAT II Insulation

*15924 - Test lead, black, 6 mm dia., 150 cm long, use with current outputs (up to 30 Amps) CAT II Insulation

*We do not sell the 15923 and 15924 individually, only combined/twisted into Part No. 620088.
1
D684025Test lead, red, 200 cm long, use with voltage/current (up to 15 Amps) and timer, CAT II insulation1
D684026Test lead, black, 200 cm long, use with voltage/current (up to 15 Amps) outputs and timer, CAT II insulation1
E684027Lug adapter, red, 6.2 mm, use with voltage/current (up to 30 Amps) outputs and timer, CAT II Insulation1
E684028Lug adapter, black, 6.2 mm, use with voltage/current (up to 30 Amps) outputs and timer, CAT II Insulation1
F684029Lug adapter, red, 4.1 mm, use with voltage/current (up to 20 Amps) outputs and timer, CAT II Insulation1
F684030Lug adapter, black, 4.1 mm, use with voltage/current (up to 20 Amps) outputs and timer, CAT II Insulation1
GDK-41Small, black knobs10
HTPA10 Attachment1

The TPA10 Test Paddle Attachment gives you more ways to connect when using the STATES V1TP10, 10 Pole Test Paddle, for testing.
Part No. TPA10 - 10 Pole Test Paddle Attachment

Small, black test paddle knobs for securing TPA10 Attachment to test paddle.
Part No. DK-41

Part No. V1AT10
Includes V1AT10 10 Pole Test Paddle, TPA10 Test Paddle Attachment and Black Knobs.

Test Plug
Part No. 15000
Used in connection with the current shunt jack on States test switches, this plug provides a safe, quick connection for indicating or testing instruments without opening current transformer secondaries or disturbing permanent wiring.
The plug is easily inserted at right angles to the test block.

Probes
Part No. 150LS
15000 with leads, red and black spade lugs.

Part No. 150LB
15000 with leads, red and black banana jacks.

Phenolic Head Binding Posts
The body is a bolt with internal and external thread and can be fastened securely to the switchboard or other base by one hex nut. The binding head and stud collar are made of molded phenolic. The head screws into the body with a long thread that makes a good contact and prevents the tendency of the head to fall off and become lost. All metal parts are brass.
Part No. 40091B (black)

Jumper Strips
Part No. TBT168 58 Pole Strap
This nickel-plated jumper strip is made specially for the STATES Type NT & ZWM Terminal Blocks and the STATES Type MTS Test Switches.

Insulated Socket Wrench
Part No. 16028
This compact, lightweight, 7 inch wrench with insulation to the socket head has a hollow shank that extends 21/2 inches over a 3/16 inch stud and 17/8 inches over a 5/16 inch stud. It is designed for use as a 1/2 inch socket wrench or as the handle for the following screwdriver and socket adapters:
(a) Socket, 3/8 in. Part No. 16027
(b) Socket, 5/16 in. Part No. 16025
(c) Screwdriver Part No. 16022